Professional Wholesale Distribution of the VOPK COOL BAR 10000 Puffs
Operating as a premier wholesale distributor with over eight years of documented industry experience, ELFVAPING provides comprehensive supply chain solutions for modern retail markets. We specialize in the global distribution of high-capacity disposable vapes, functioning as a primary hub for brands requiring strict quality control and logistical reliability. Our platform is engineered to support both established retail chains and emerging vendors by maintaining a low minimum order quantity (MOQ) of just 10 units, allowing for scalable purchasing strategies without excessive upfront capital expenditure.
The centerpiece of our current catalog is the VOPK COOL BAR 10000 Puffs. This hardware represents a significant advancement in the engineering of disposable vapes, combining extended operational capacity with precise electronic components. In an industry where hardware reliability determines consumer retention, the VOPK COOL BAR is manufactured under stringent environmental and electrical standards, ensuring that each unit within a wholesale carton performs identically to the engineering baseline.
Technical Engineering and Hardware Specifications
The internal architecture of the VOPK COOL BAR is designed around efficiency and thermal stability. Below is a comprehensive breakdown of the device’s technical specifications, validated through standard industry metrology.
| Core Component | 1.0Ω Mesh Coil Architecture |
| Armazenamento de energia | 650mAh Rechargeable Lithium-ion Cell |
| Interface de Alimentação | Type-C Fast Charging Protocol |
| Mecanismo de Ativação | Pneumatic Draw-Activated Microcontroller |
| Formulation Concentration | 5% / 50mg/ml Standardized Ratio |
Thermodynamics of the 1.0Ω Mesh Coil
Unlike traditional wound wire coils, the 1.0Ω mesh coil inside the VOPK COOL BAR utilizes a precisely etched metallic grid. This structural design drastically increases the surface-area-to-volume ratio, facilitating a more rapid and uniform heat distribution across the heating matrix. From an engineering standpoint, this eliminates localized hot spots that can degrade the substrate. The 1.0-ohm resistance is carefully calibrated to operate within the 650mAh battery’s optimal discharge curve, maximizing aerosol production per watt while maintaining lower internal ambient temperatures.
650mAh Power Storage and Type-C Integration
Energy delivery is managed by a 650mAh rechargeable lithium-ion power cell. This specific capacity was selected to balance the physical weight of the device with the operational longevity required for high-capacity use. The inclusion of a Type-C charging port ensures compatibility with modern electrical standards, utilizing standard 5V inputs for safe and efficient replenishment. The onboard power management integrated circuit (PMIC) prevents overcharging, thermal runaway, and deep depletion, effectively extending the cycle life of the battery cell throughout the lifespan of the device.
Métricas de Teste e Validação Empírica
To ensure professional-grade reliability, the VOPK COOL BAR undergoes extensive empirical testing before being cleared for wholesale distribution. Data collected from our internal compliance checks demonstrates a highly consistent operational profile.
- Sensor Latency: The pneumatic draw-sensor responds to negative pressure within 0.12 seconds, resulting in immediate electrical activation upon inhalation.
- Thermal Mapping: Under continuous testing (10 sequential activations), exterior casing temperatures remained well within the safety margin, not exceeding 34 degrees Celsius.
- Cycle Validation: Battery degradation tests confirm that the 650mAh cell retains optimal voltage delivery across multiple recharge cycles, ensuring the 10000-puff rating is achievable over the functional life of the hardware.
- Structural Integrity: Drop testing from standard retail counter heights (approximately 1.2 meters) resulted in zero chassis fractures or internal component decoupling.
Logística e Dados Dimensionais por Atacado
For B2B partners, accurate logistical data is essential for calculating freight classes, warehousing density, and inventory turnover. The VOPK COOL BAR is packaged to optimize dimensional weight for global transit. ELFVAPING ensures all master cartons are structured to prevent load crushing during maritime or aerial logistics.
- Minimum Order Quantity: 10 Units
- Retail Display Unit: 10 Units/Box
- Volume da Caixa Mestra: 200 Units/Carton
- Dimensões da Caixa: 518 × 297 × 235 mm
- Gross Master Weight: 13 kg
Hardware Comparison
Understanding how the VOPK COOL BAR positions itself against industry standard single-use hardware can assist procurement departments in making informed purchasing decisions.
VOPK COOL BAR 10000
- Recarregável via Type-C
- 1.0Ω High-Efficiency Mesh
- 650mAh Regulated Cell
- Extended Operational Capacity
Generic Market Standard
- Não Recarregável
- Standard Wound Wire
- Unregulated Battery Delivery
- Limited Operational Lifespan
Available Variants
The VOPK COOL BAR is currently manufactured in the following specific profiles. Vendors can select from these standardized options when building their wholesale orders:
Industry Knowledge Point: Compliance and Battery Protocols
The integration of lithium-ion cells in disposable vapes necessitates strict adherence to global shipping standards, specifically UN38.3 testing protocols for transport safety. When handling wholesale quantities, distributors must ensure environmental compliance under regional WEEE (Waste Electrical and Electronic Equipment) directives. The rechargeable nature of the 650mAh cell in this unit reduces overall electronic waste volume compared to non-rechargeable hardware of similar capacities, offering a more sustainable structural lifecycle before ultimate disposal.
Operational and Logistics FAQ
What is the exact minimum order quantity required to secure wholesale pricing?
ELFVAPING processes orders starting at a strict MOQ of 10 units. This allows retailers to sample hardware performance or stock smaller display cases without tying up excessive resources.
How should the VOPK COOL BAR be stored within a retail warehouse?
Cartons should be stored in a climate-controlled environment, away from direct thermal sources. Extreme heat can negatively affect the chemical stability of the 650mAh lithium-ion battery and the physical properties of the internal formulation.
Is a charging cable included within the retail box?
No, in compliance with international electronic waste reduction efforts, the device utilizes a standard Type-C interface, allowing users to employ existing standard cables for power replenishment.
How is the 10000-puff count measured?
This metric is calculated using automated pneumatic machinery in a laboratory setting, simulating standard inhalation durations. Operational longevity will scale according to individual user draw duration and charging consistency.

Porquê escolher a Elf Vaping
A Elf Vaping oferece uma ampla seleção de vapes descartáveis premium para clientes particulares e compradores profissionais. Damos prioridade à qualidade, informação clara e serviço fiável tanto em encomendas de retalho como de grosso.
Vasta gama de produtos
Na Elf Vaping encontra vapes descartáveis de marcas como FUMOT, Waspe, Vapme, Bang Box e RandM. O catálogo abrange diferentes capacidades e concentrações, desde modelos compactos com cerca de 600 puffs até dispositivos com valores anunciados de 50 000 puffs ou mais.
Preços competitivos e descontos por volume
Para clientes empresariais, preços previsíveis e volumes flexíveis são importantes. Por isso disponibilizamos escalões e preços de volume que permitem a retalhistas e distribuidores comprar maiores quantidades com melhor custo unitário.
Envio rápido e fiável
A Elf Vaping presta atenção à embalagem segura e ao processamento rápido das encomendas. Para muitos destinos europeus existem opções de envio de aproximadamente 3 a 7 dias; o prazo real depende do destino, transportadora e eventuais formalidades aduaneiras.
Apoio ao cliente acessível
A nossa equipa ajuda com questões sobre produtos, encomendas e logística. Desde a escolha do produto até ao apoio após a compra, procuramos manter uma comunicação clara e prática durante todo o processo.
A Elf Vaping combina vapes descartáveis de qualidade, quantidades de encomenda flexíveis e apoio para retalho e grosso. O objetivo é proporcionar uma experiência de compra fiável, com informação clara e serviço consistente.
As nossas vantagens
A Elf Vaping combina seleção de produtos, relações com fornecedores e logística internacional para servir consumidores e empresas. Acompanhamos a evolução dos produtos e adaptamos catálogo e serviço às necessidades do mercado.
O controlo de qualidade acompanha várias fases do aprovisionamento e distribuição. Os produtos são avaliados em características relevantes de desempenho e segurança antes de entrarem no catálogo, procurando reduzir defeitos e inconsistências.
Explore modelos RandM Tornado, Vapme e FUMOT, bem como marcas como Bang Box, Waspe, Elf Box e Bang King. O catálogo reúne diferentes designs, perfis de sabor e funções técnicas para responder a vários mercados e preferências.
Acompanhamos novidades em design, baterias, ecrãs, resistências e sabores para adicionar ao catálogo produtos relevantes. Desta forma, a oferta acompanha a evolução do mercado de vapes descartáveis.
A nossa equipa está disponível antes, durante e depois da encomenda. Através de WhatsApp e e-mail, os clientes podem obter rapidamente informações sobre produtos, pagamentos, envio e estado da encomenda.
A garantia de qualidade faz parte da seleção, compra e distribuição. Trabalhamos com fornecedores e parceiros de produção que aplicam controlos documentados e procuramos manter qualidade consistente entre fornecimentos.
Consoante o destino, podem estar disponíveis soluções como Delivered Duty Paid (DDP), integrando direitos e impostos de importação na gestão do envio. A disponibilidade e condições dependem do país, tipo de produto e rota.
Para empresas que pretendem desenvolver uma marca própria, a Elf Vaping pode prestar apoio ODM e OEM. Através de parceiros de produção e duas instalações de fabrico, os projetos podem incluir embalagem, logótipo, configuração do produto e apresentação da marca, dependendo do volume e viabilidade técnica.














































Avaliações
Ainda não existem avaliações.