Comprehensive Technical Overview of the WASPE AIVIOU SHISHA HOOKAH 300000 Puffs
The global market for disposable vapes requires continuous engineering advancements and rigorous quality assurance to meet the evolving demands of consumers and wholesale distributors. The WASPE AIVIOU SHISHA HOOKAH 300000 Puffs represents a significant milestone in high-capacity device architecture. By integrating an expansive 60ml reservoir volume, a robust 1500mAh power cell, and real-time LED display telemetry, this device is engineered for extended operational longevity. Through ELFVAPING, a premier wholesale distributor with over eight years of verified industry expertise, global retailers can procure this cutting-edge device with optimized logistics, ensuring reliable supply chains and consistent product quality.
Engineering Specifications and Structural Data
- Kimeneti Kapacitás: 300,000 Puffs (Calculated via standardized pneumatic testing)
- Fűtőelem: 0.6ohm Advanced Mesh Coil
- Reservoir Volume: 60ml
- Active Concentration: 0.6%
- Energiaforrás: 1500mAh Rechargeable Cell
- Töltési csatlakozó: Type-C input
- Felhasználói felület: Beépített LED kijelző
- Fizikai méretek: 51mm x 51mm x 190mm
- Unit Mass: 160g per piece
Empirical Performance and Thermodynamic Efficiency
In the specialized field of disposable vapes, the thermodynamic efficiency of the internal heating element directly correlates with overall product reliability and consumer satisfaction. The WASPE AIVIOU utilizes a highly calibrated 0.6ohm mesh coil. Empirical laboratory measurements indicate that mesh architectures featuring a 0.6ohm resistance provide an optimal surface-area-to-mass ratio. This specific configuration facilitates rapid and uniform heat distribution across the heating matrix, actively preventing localized thermal spikes that can degrade the structural integrity of the internal components.
Furthermore, the integration of a 1500mAh cell addresses the primary limitation often observed in high-capacity disposable vape products: power degradation over time. The 1500mAh cell undergoes strict multi-stage quality control, aligning with international battery safety protocols. By pairing this robust power source with a Type-C charging interface, the device ensures consistent voltage output throughout its lifecycle. The Type-C protocol allows for stable current delivery during recharge cycles, mitigating the risk of cellular degradation and thermal runaway, which is a critical safety consideration for wholesale importers handling bulk shipments.
Methodology for Output Validation and Measurement
Claims regarding output capacity in disposable vapes must be substantiated through verifiable testing methodologies. The specification of 300,000 puffs is determined utilizing automated mechanical puffing simulators. These machines are programmed to replicate standardized inhalation patterns, typically defined by a three-second activation duration followed by a predefined resting interval to allow the internal temperature to normalize. This empirical approach ensures that the 60ml reservoir volume is efficiently utilized, maintaining a consistent delivery rate from the first activation to the final cycle.
The integration of an LED display serves as a functional diagnostic tool rather than merely an aesthetic addition. This telemetry system relies on internal microprocessors to monitor the electrical resistance and remaining voltage of the 1500mAh power cell. By providing the user with real-time data regarding operational status, the device minimizes the guesswork traditionally associated with closed-system disposable vape devices. This feature reflects a maturation in product design, aligning with consumer expectations for smart, trackable hardware.
Strategic Procurement and Supply Chain Authority
As the disposable vape market expands, partnering with an authoritative and transparent distributor becomes imperative for retail success. ELFVAPING operates as a premier wholesale hub with an extensive eight-year operational history. Our expertise in supply chain logistics allows us to distribute highly sought-after brands, including BANG BOX, WASPE, UWIN, BIMO, RandM, BANG, VOZOL, Elf Box, and MYDE, across global markets. We adhere to stringent international trade compliance standards, ensuring that every batch of WASPE AIVIOU devices meets rigorous quality assurance benchmarks before export.
Logistical Specifications for Bulk Distribution
Understanding the exact physical parameters of bulk shipments is crucial for accurate freight calculation and inventory management. The WASPE AIVIOU is packaged to optimize spatial efficiency in commercial transit.
| Logisztikai paraméter | Data Point |
|---|---|
| Minimális rendelési mennyiség (MOQ) | 10 darab |
| Inner Packaging | 10 pieces per presentation box |
| Fő Karton Mennyiség | 120 pieces per carton (ctn) |
| Bruttó súly (B.S.) | 21.0 kg per carton |
| Unit Dimensions | 51mm x 51mm x 190mm |
Elérhető termékváltozatok
The WASPE AIVIOU SHISHA HOOKAH 300000 Puffs is manufactured in several distinct variants. The following selections are currently available for wholesale procurement:
- Watermelon Ice
- Jég Mentol
- Mango Jég
- Blue Razz Lemon
- Mixed Berries
- Summer Peach
- Citrom Menta
- Szőlő Jég
- Blue Fantasy
- Magic Love
Összehasonlító hardverelemzés
To fully understand the market positioning of the WASPE AIVIOU, it is necessary to compare its technical specifications against standard devices frequently encountered in the current distribution landscape. The comparison below highlights the operational advantages of integrating a 1500mAh battery and a 60ml internal volume.
WASPE AIVIOU SHISHA HOOKAH
Teljesítmény mag: 1500 mAh
Tartály: 60ml
Output Volume: 300,000 measured cycles
Telemetria: Integrált LED képernyő
Ellenállás: 0,6 ohm hálózat
Szabványos Piaci Egyenértékű
Teljesítmény mag: 650mAh
Tartály: 15 ml - 20 ml
Output Volume: 10,000 – 15,000 cycles
Telemetria: Analog indicator only
Ellenállás: 1.0ohm – 1.2ohm
Safety and Environmental Compliance
Distributors of disposable vapes must remain cognizant of hardware safety and material compliance. The 160g physical chassis of the WASPE AIVIOU is constructed using durable, heat-resistant polymers designed to insulate the 1500mAh battery from the 0.6ohm heating element. This internal separation is a fundamental engineering requirement to prevent thermal transfer and ensure exterior temperatures remain comfortable during continuous usage.
Furthermore, the integration of the Type-C port supports modern environmental directives aimed at standardizing electronic charging infrastructure. By utilizing universal charging protocols, the device reduces the necessity for proprietary cables, aligning with broader initiatives for electronic waste reduction. Retailers can confidently present this product knowing the underlying technology adheres to recognized principles of electrical safety and operational stability.
Gyakran Ismételt Műszaki Kérdések (GYIK)
How is the 300,000 puff rating empirically verified?
The rating is derived using automated pneumatic equipment that measures specific draw volumes over standard temporal intervals. It is based on a calculation combining the 60ml internal reservoir capacity with the optimized vaporization rate of the 0.6ohm mesh coil.
What specific advantage does the 0.6ohm mesh coil provide?
A resistance of 0.6 ohms creates a highly efficient electrical circuit capable of generating substantial thermal energy quickly. The mesh design spreads this energy across a wider internal surface area, resulting in highly consistent vaporization without the risk of localized burning.
What metrics does the built-in LED display provide?
The integrated telemetry screen utilizes internal sensors to relay real-time data regarding the remaining capacity of the 1500mAh power cell and the general operational status of the device, providing a transparent usage metric for the end consumer.
What are the logistical requirements for placing a wholesale order through ELFVAPING?
ELFVAPING maintains a highly accessible Minimum Order Quantity (MOQ) of just 10 pieces. For larger commercial distributions, products are palletized in master cartons containing 120 units each, with a total carton weight of 21.0kg, allowing for highly predictable freight calculations.
Why is a 1500mAh cell utilized instead of a smaller component?
To effectively support the prolonged output associated with a 60ml reservoir and the energy demands of a 0.6ohm mesh coil, a 1500mAh cell is mandatory. This higher capacity ensures the device can maintain stable voltage delivery between Type-C charging intervals, maximizing hardware longevity.
By selecting ELFVAPING as your primary procurement partner, you are securing access to premier disposable vapes backed by a robust supply chain, eight years of established industry authority, and a commitment to delivering sophisticated hardware solutions to the global market.
Értékelések
Még nincsenek értékelések